− 51 −
(2) Sewing data list
1
Items that are displayed in the data input screen
. . . Item that is not displayed due to other setting state
No.
Item
Setting range
/
Edit unit
Initial value
Motion mode change-over
With/without of motion of sewing machine motor, center knife and corner
knife is selected.
- - -
Cloth feed mode
Cloth feed, sewing ma-
chne thread trmmng and
center knife mode
Cloth feed, sewing ma-
chne thread trmmng
Cloth feed, sewing ma-
chne thread trmmng,
center knife and corner
knife mode
Sewing mode change-over
Sewng mode s selected.
＊
In case of alternate sewing, flap priority sewing is set with
.
- - -
L sze sewng
Left flap sewing
Right flap sewing
Flap prorty sewng
L size setting
In case of L size sewing, the sewing length is set.
＊
It is possible to set only when setting L size sewing
.
＊
For the long and wde type, t s possble to set up to 250 mm.
(However, it is possible to set up to 300 mm without corner knife.)
18.0 to
220.0
/
0.1mm
150.0mm
Marking light irradiation position change-over
Sewng start rradaton/sewng end rradaton/center rradaton s select
-
ed.
- - -
Sewng start rradaton
Sewng end rradaton
Center rradaton
Flap concealed stitching data (Left sewing start)
Position of sewing start of left-hand flap is adjusted.
＊
It is possible to set only when
is set to flap sewing.
–9.9 to 9.9
/
0.1mm
0.0mm
Flap concealed stitching data (Left sewing end)
Position of sewing end of left-hand flap is adjusted.
＊
It is possible to set only when
is set to flap sewing.
–9.9 to 9.9
/
0.1mm
0.0mm
Flap concealed stitching data (right sewing start)
Position of sewing start of right-hand flap is adjusted.
＊
It is possible to set only when
is set to flap sewing.
–9.9 to 9.9
/
0.1mm
0.0mm
