11. Table of the function No. of the input mode
Function
T h r e a d
Thread
is set.
0 0 2
003
Temp Stop
004
Refer Point
005
Pt
the jump feed from the
and sets
second
Temporarily stops the sewing machine during sewing a pattern.
Sets the reference point
enlargement reduction.
Actuates
crank.
006
One-Turn
This function is used
sewing machine one
while the
feed is stopped.
007
M a r k 2
Makes ON! OFF the thread tension No. 3.
008
Sets the pattern skip.
010
Delay
in combination with the external
wait far the time
required.
0 1 1
Waits for the signals transmitted from the outer devices.
012
output
Transmits signals to
outer devices.
013
Pre Adj
Makes ON: OFF the adjusting device for the height of the intermediate
0 2 0
Jump
The feed
without sewing the
0 2 1
Point Sewing
Makes the
data for every single stitch.
0 2 2
Sew Abs Cord
Makes the sewing data
the linear sewing and
sewing.
023
Makes the sewing data for the linear sewing.
024
Spline
Makes the sewing data for the
sewing.
025
A r c
Makes the sewing data for the arc sewing.
0 2 6
, Circle
0 3 0
Linear Zig
The base line is indicated as the linear to enter the data for the zigzag
0 3 1
Spline Zig
The base line is indicated as the
to enter the data for the zigzag
stitching.
032
Arc Zig
The base line is indicated as the arc
enter the data for the zigzag
s t i t c h i n g .
033
Circle Zig
The base line is indicated as the circle to enter the data for the
034
Linear Ofs
stitching.
Makes the
data for
linear sewing with a predetermined
the line specified.
035
Spline Ofs
Makes the sewing data for the curve sewing with a predeterminec
from the
specified.
036
Arc Ofs
Makes the sewing data for the arc sewing with a predeterminec
distance from the arc specified.
037
Circle
Makes the sewing data for the circle sewing with a predeterminec
I
I distance from
circle specified.
040
Linear
Makes the sewing data for the linear sewing
the
the same direction.
041
Spline
Makes the sewing data for the
sewing making the
in the same direction.
0 4 2
Makes the sewing data for
sewing making the
in the same direction.
0 4 3
Circle
Makes the
data for the circle
making the
sewing in the same direction.
4 9