At the start, make the
linear
sewing,
and sewing
pitch of 2.5 mm. And, the condensation stitching which
makes the sewing pitch finer, is to be performed at the
and end of sewing.
Specify the numbers of the respective stitches at the
and end of sewing and the pitch of condensation stitching.
1) Pressing the [Input selection] key, turn ON the power switch.
Origin
(Note)
Keep the
[Input selection]
key held pressed until the
display appears after the origin retrieval has been
performed.
When the display appeared, insert a piece of paper or the like on
which the shape of input is written under the feeding frame by
raising lowering the feeding frame
means of the feeding frame
2) Press the [Jump] key.
N 000
3) Move the feeding frame from 0 to A by the moving key
4) Press the [Execution Finish) key
5) Press the [Line] key
6) Press the numeral key in the order of
and press the
[Execution Finish] key.
(Stitch length 2.5 mm)
Jump
X +
Select Function
P 020 (0.1 mm)
Input P
No 022
40