8) Press the [Execution Finish] key.
As the pitch is set 2 mm, press [Enter] key.
ii) The sewing line is made on the right side of the advancing
direction of the input tine. So. indicate the right side. Press
of
the numeral key. and press the [Enter] key.
7) Press the
key, and select
2
No 045
W 100 (0.1 mm)
s = 1 (1 : 2 :
As the width is set 4 mm. indicate
by the numeral key,
and press the [Enter] key.
12) Press the [Execution Finish] key.
Move the feeding
from A to B by the moving key, and
press the [End point] key.
14) Move the feeding frame from B C by the moving key. and
press the
point] key.
44