V. OPERATION OF THE SEWING MACHINE (BASIC)
Two service patterns are included in the floppy disks supplied as accessories.
Pattern No.
I
1. Reading a sewing pattern data in the sewing machine
WARNING :
Never
place
your fingers or any other thing under the feeding frame as the feeding frame automatically
down after the
of
a pattern.
As an example, read a sewing pattern using a service
pattern.
1) Turn ON the power switch.
2) Insert a floppy disk.
3) Push the [Pattern No.] key.
4) Input a pattern No. of three figure number Dressing
the numerical key.
Input
in the
pattern.
5) Push the [Enter] key.
When the pattern reading procedure completes, the
feeding frame comes down once. Then the machine
will retrieve the origin and the sewing LED
0
will light
up. Now, it is ready to start sewing.
frame.
2) Every press on the [Forward] key or the [Backward]
key will move the needle point by one stitch. Keeping
the key held pressed, the needle will move
continuously.
3) After you have checked the contour of the sewing
pattern. press the [Return-to-origin] key. This will return
the needle point to the start position and the feeding
frame will go up.
If you keep pressing the [Forward] key or the [Backward]
key for more than a certain time, the feed will continue
even if you detach the key. Press the key again to stop
the feed.
12