Move the feeding frame from A by the direction key.
Press the [Execution /Finish] key.
Press the [Line] key.
to) As the stitch length is set 1.8 mm, input
by the numeral
key, and press the [Execution /Finish] key.
Move the feeding frame from A to bv the direction kev, and
press the [End point] key.
12) Move the feeding frame from B to C by the direction key, and
the
kev.
13) Move the feeding frame from C to D by the direction key, and
press the [End point] key.
14) Press the [Execution Finish] key.
Linear
Y = 00100
Select Function
* *
15) For D-E-F arc input is made. In this case. however, selection of
function is made from the indication of the table of functions of
the memory switch.
Press the [Code] key
33