TROUBLESHOOTING FOR THE
JUICE EXTRACTOR
PROBLEM
POSSIBLE CAUSE
SOLUTION
Juice extractor will
not start when speed
button is depressed.
The juice extractor
portion of the
appliance may not be
assembled correctly.
Check the ASSEMBLY
instructions found on pages
8 and 9.
The motor of the juice
extractor seems to be
struggling.
• Pulp container may
be full.
• Pulp may have
collected under the
lid.
• The speed selected
may not be correct
• Turn off the appliance.
Empty the pulp container.
Do not allow the pulp
container to get too full.
• Turn off and unplug the
appliance. Disassemble
the appliance and take off
the lid. Wash thoroughly
and return to appliance
following the assembly
instructions.
• Check the
RECOMMENDED SPEED
guide on pages 10 and 11.
The juice extractor
has stopped producing
juice.
The filter basket may
be blocked.
Turn off and unplug the
appliance. Disassemble the
appliance and take off the
lid. Wash thoroughly and
return to appliance following
the assembly instructions.
The juice extractor is
not producing as much
juice as expected.
High fiber fruits and
vegetables may be
clogging the filter.
Turn off and unplug the
appliance. Disassemble the
appliance and take off the
lid. Wash thoroughly and
return to appliance following
the assembly instructions.
Appliance stops
running.
Motor may be
overheating.
Unplug appliance and allow
it to cool approximately
5 minutes before continuing
use.
NOTES
OVERHEAT PROTECTION SYSTEM
Important: This appliance contains a PTC overheat protection system. When
the appliance is being operated for too long or with too much load, the PTC
protector will shut down the power of the appliance to protect the unit. If the
power shuts down, unplug for 0 minutes and plug in for normal operation.