9
• The measuring cup holds ¹/³ cup (80 ml / 2.7 oz)
of liquid and can be used when adding ingredients
such as juices, milk, cream and liquor
(V)
.
Note:
Use no more than ¹/³ cup (80 ml / 2.7 oz) of liquid
at a time in the workbowl.
• Once the workbowl lid has been removed from the
workbowl place it upside down to hold the chopping
blade and keep your counters clean.
• Although plastic parts of the workbowl are
dishwasher-safe, you may wish to wash them by
hand to retain their clear appearance.
• When making bread crumbs, chopping nuts or grinding coffee beans make
sure workbowl is completely dry.
• For grinding coffee beans and nuts, use the flat blade and place up to 2 cups
(about 5 oz.) of coffee beans or 1 cup (about 4 oz.) of nuts into the workbowl.
Press the High button; allow the appliance to run until the desired grind is
achieved.
• When chopping dried fruits, add a little flour to keep the pieces from sticking
together.
• Do not use the workbowl to:
o Grind bones, grains or hard spices
o Liquefy fruits and vegetables
Care and Cleaning
This product contains no user serviceable parts. Refer service to qualified
service personnel.
Important: Always unplug your appliance from the outlet before cleaning.
CLEANING
1. Unplug your Juiceman
®
Express and disassemble.
2. Using a sponge or damp cloth, clean the motor base and rubber feet.
Important: Do not immerse the base in water or spray with water. Clean only
by wiping with a damp sponge, cloth or paper towel.
3. All parts – except the motor base – are dishwasher-safe (top-rack only)
or you may wash in warm, soapy water, using any mild liquid dishwashing
detergent. Do not use any products containing ammonia or scouring
powders, as these can dull, scratch or mar the surface. Use the cleaning
brush provided to remove pulp left on any of the removable parts. Do not
use metal brushes or pads.
REMOVING TOUGH STAINS
1. Due to powerful staining properties of carotenoids found in many
vegetables, particularly carrots, we suggest soaking any stained parts
overnight in one of the following solutions:
• Biodegradable soap in enough warm water to cover workbowl parts
• ¼ cup bleach added to a sink full of warm water
• 1 part warm water to 1 part cider vinegar
• ½ small box of baking soda in enough warm water to cover workbowl
parts.
Important: Never use ammonia or abrasive cleansers!
2. After soaking overnight, lightly scrub with soft bristle brush and liquid
detergent.
STORAGE
Store your appliance in a clean, dry place. Never wrap cord tightly around the
appliance. Do not put any stress on cord where it enters the motor base, as
this could cause cord to fray and break.
V
8