6
JUDO i-soft
Intended use
2.
Intended use
Both installation and use of the softener are
subject to all rules and regulations
concerning such units and valid in the
country of use.
In addition to the safety regulations as given
in this manual all locally valid regulations
governing accident prevention, all regula-
tions governing health and safety in the
workplace must be observed at all times.
The water to be softened must conform
to the European drinking water regula-
tions!
Always contact the manufacturer/supplier
before using water of a different quality or
with additives!
This softener is suitable for use in cold
drinking water up to maximum ambient
temperature of 30 °C (86 °F).
It is produced to state of the art standards
and the safety regulations generally
accepted in Germany.
The softener may only be used as described
in the instruction manual. Any other or
further use is deemed not to be intended
use.
Additional dangers exist in case of non-
intended use and where the danger symbols
and safety information are not observed.
The manufacturer/supplier are not liable for
any losses or damage resulting from such
use. The risk is borne solely by the user.
Intended use also includes observing the
instruction manual.
The manufacturer/supplier must always be
consulted before using the softener outside
the use limitations given in the instruction
manual.
The softeners are only to be used in a tech-
nically perfect condition, for their intended
use, safely and in awareness of the dangers
and with full observance of the instruction
manual!
Have any malfunctions corrected imme-
diately!
In order to be able to safely discharge the
wastewater in operation and in case of any
defect in the system, precise compliance
with the details given in the chapter
“Requirements for the place of installation”
is necessary!
ATTENTION
(see chapter on “Safety information and
dangers due to non-compliance”)
The regenerating salt used is removed from
the softener columns with the wastewater.
Therefore, it may not be used to water plants
or for similar purposes.
The range of use for DVGW-tested
softeners in Germany is specified in the
DIN 1988 standard, part 2, para. 8.3.2.
According to this standard, there are no
restrictions regarding the range of use for
these softeners. This usage specification
may vary in other countries. Please consult
regulations in country of use.
The capacity of the softener is designed so
that it can be used to partially soften all the
water for a detached or multiple use
building, as well as corresponding part water
quantities for hot water, swimming pools,
washing machines and dishwashers.
