28
JUDO i-soft
Data sheet
9.4
Installation dimensions
9.5
Scope of supply
–
softener (incl. i-guard, i-matic)
–
salt container
–
accessories bag
–
installation and operating instructions
–
built-in rotary flange
JQE 1" with threaded fitting
–
backup overflow hose
–
wall support
9.6
Accessories
–
bypass valve JQX (order no. 8735210)
–
hardness measuring equipment JGHP
0 - 37.5 °e (order no. 8742120)
–
JUDO extension quick set JQR for
series connection of two JUDO devices
(e. g. filter and softener) to a pipe
connection (JQE) (order no. 8250041)
–
wall bracket for salt container
(order no. 8733066)
–
connection cable for ZEWA water stop
(order no. 2201239)
–
failure signal cable (order no. 2200717
9.6.1 Protective measures against
corrosion
If water has a water hardness of 0 °e plastic
pipes or corrosion resistant pipes should be
laid. In the case of water with partial
softening (approx. 10 °e), zinced pipes and
copper pipes can be laid.
Our recommendation:
Install a JUDO JULIA metering pump in the
mixed water pipe downstream of the
softener, in order to proportionately enrich
the water with a JUL mineral solution.
The JUL mineral solutions contain active
components, which stabilise the residual
carbonate constituents and create the pre-
requisites for developing a homogeneous
protective layer in downstream pipe sys-
tems. These active ingredient components
correspond to the prescribed type, quality
and quantity in the German drinking-water
regulations (treatment substances and dis-
infection methods).
Fig. 18:
Installation dimensions
A
195
installation lenght
(rotary flange)
B
390 unit width
C
165 height above pipe centre
D
465 height below pipe centre
E
375
installation depth up to pipe
centre
E1
450
installation depth up to pipe
centre with JQX
H
100
minimum distance between
softener and salt container
K
390 width of the salt container
L
460
depth of the salt container
(with overflow)
M
560 height of the salt container
sewer junction necessary
All dimensions in [mm](see fig. 18)
