24
JUDO BIOSTAT-COMBIMAT
Data Sheet
9.4
Mounting Dimensions
9.5
Scope of supply
–
Water treatment devices
–
Wall support (2200500) to prevent the
water treatment appliance from twisting.
No support of weight!
–
Built-in rotary flange
JQE with threaded fitting
–
Installation and Operating Instructions
–
Hand lever (only BST-CA)
9.6
Accessories
–
bypass valve JQX,
Order No. 8735210
–
Extension QUICKSET JQR for series
connection of two JUDO units (e.g. filter
and water treatment device) to a built-in
rotary flange,
Order No. 8250041
9.6.1 Protective measures against
corrosion
Our recommendation for corrosion
problems in cold water:
A metering pump JUDO JULIA has to be
mounted ion the water pipe after the water
treatment device, in order to enrich propor-
tionally the water with a mineral solution
JUL.
Mineral solutions JUL contain active com-
ponents which create the conditions in
which a homogeneous protective coating
can be formed in the system of pipework
located thereafter. These active compo-
nents correspond to the prescribed type,
quality and quantity, according to in article
11 Drinking Water Regulations 2001 on
treatment substances and disinfection
methods.
BST-CA Type 15, 25
BST-CA Type 50
Fig. 12: Mounting Dimensions
Type
JQX
Dimensions
A
Depth
to pipe
centre
Type 15, 25
without 12.6 (320)
with
15.2 (385)
Type 50
with
16.5 (420)
B Width
Type 15, 25
9.0 (230)
Type 50
27.6 (700)
C Height
21.7 (550)
D Minimum height to pipe
18.7 (475)
E Minimum distance above
5.9 (150)
F
Minimum distance below
5.9 (150)
All dimensions in Inch (mm) (see Fig. 12)