16
JUDO BIOSTAT 25 TGA
Operation
In the feed of the unit, is a propeller water
meter which can even detect such small
flows of water as 0.4 gpm (1.5 l/min).
Together with a microprocessor-controlled
electronics, optimal water treatment is
ensured at all times from tiny flows up to the
nominal capacity, and also depending on
the water quality by adapting the electrical
impulses.
5.4
Control lamps,
manual pushbuttons
Fig. 9:
Control lamps, manual pushbuttons
hand
Operation / Conditioning
Cleaning / flushing
Maintenance
Fault
Manual cleaning / flushing
Battery low
LED 1 Operation / Conditioning
Permanent green light: The water treat-
ment device is ready for use.
Green light flashing: Water treatment is
taking place.
LED 2 Cleaning / flushing
Permanent green light: A cleaning /
flushing cycle is being carried out.
LED 3 Maintenance
Permanent yellow light: A maintenance
should be performed (see chapter
“Maintenance”).
Permanent red light: A maintenance has
to be performed.
Red light flashing: A maintenance must
be performed; there is no water treatment
taking place anymore.
LED 4 Battery low
Red light flashing: The battery must be
changed otherwise no further cleaning /
flushing can be carried out.
LED 5 Fault
Red flashing light: the water treatment
device is not ready for use (see chapter
“Fault”).
Hand
manual pushbutton
Triggers a cleaning / flushing cycle.
