EN/1908.V01
GT06-S32H5112J
28
EN
B. When the “Transponder” (Middle) column is highlighted:
(1) Press YELLOW button on remote control to enter Add menu.
Frequency
Press LEFT/RIGHT navigation button to set desired frequency.
Symbol
Press LEFT/RIGHT navigation button to set desired Symbol value.
Polaritization
Press LEFT/RIGHT navigation button to select desired option.
(2) Press GREEN button on remote control to enter Edit menu.
The operations of Edit menu are the same with Add menu.
(3) Press BLUE button on remote control to enter Scan menu.
- Press UP/DOWN navigation button to highlighted desired item.
- Press LEFT/RIGHT navigation button to select desired Channel Type, Service Type and Scan Mode.
- Then press OK to scan programs automatically.
C. When the “Setting” (Right) column is highlighted:
LNB (Low Noise Block) Power
Press LEFT/RIGHT navigation button to select desired option.
LNB Type
Press OK button to enter submenu. Then use UP/DOWN navigation button to select desired option.
22 kHz Tone
Press LEFT/RIGHT navigation button to select desired option.
Toneburst
Press LEFTRIGHT navigation button to select desired option.
DisEqc1.0 (Digital Satellite Equipment Control)
Press LEFT/RIGHT navigation button to select desired option.
DisEqc1.1
Press LEFT/RIGHT navigation button to select desired option.
Motor
Press LEFT/RIGHT navigation button to select desired option.
Single Cable (also known as “One Line Technology”)
Press OK button to enter submenu. Then use navigation buttons to select desired option.
