EN/1908.V01
GT06-S32H5112J
26
EN
- Press SOURCE button on the unit or remote control to select HDMI input source.
CEC:
Turn on/off HDMI CEC.
Standby:
Turn on/off auto standby.
ARC:
Turn on/off ARC function.
4.8 Audio Language
This item is used to select desired audio language.
4.9 Subtitle Language
This item is used to select desired subtitle language.
4.10 Restore to Default
This item is used to recall factory default settings.
ATV AND OTHER MODES
Press SOURCE button on the unit or remote control to select desired input source.
For menu operations in these modes, please refer to the menu operations of DTV mode.
SATELLITE MODE
TIPS:
Connect your Satellite antenna to the RF (S2) terminal first to receive satellite signals.
Press SOURCE button on remote control to select “DTV”.
Make sure “Antenna Type” has been selected “Satellite”.
1. AUTO TUNING
- Press MENU button to call out the main menu.
- Select “Channel” using navigation buttons and
press RIGHT button to enter it.
- Then highlight “Auto Tuning” and press OK to
enter it.
Satellite
: Select an available satellite.
Scan Mode
: Select your scan mode.
Service Type
: Select a service type.
Channel Type
: Select a channel type.
When finished above settings, highlight “Confirm”
and press OK to scan satellite TV programs
automatically.
2. DISH SETUP
- Press MENU button to call out the main menu.
- Select “Channel” using navigation buttons and press RIGHT button to enter it.
- Then highlight “Dish Setup” and press OK to enter it.
- Press LEFT/RIGHT navigation button to highlight Left, Middle or Right column.
- Press MENU button to return.
