3
1. Manufacturer’s logo and contact information
2. Product reference
3. Conformity mark for the Regulation (EU) 2016/425
4.
Controlling Notified body
5. “The Triman”
6. Read the User Instructions
7. “The Green Dot” / “Der Grüne Punkt”
8. Batch number
9. Serial number
10. Date of manufacture
11. Length
12. Material
13. Standard number/year
14. Type of the standard to which the product complies
DESCRIPTION
These ANCHORAGE SLINGS are classed as a Personal Protective Equipment (PPE) by
the European PPE Regulation (EU) 2016/425 and have been shown to comply with this
regulation through the Harmonized European Standard EN 795: 2012 (Type B).
Type B being an anchor device with one or more stationary anchor points without the
need for a structural anchor(s) or fixing element(s) to fix it to the structure.
Certification body:
SATRA Technology Europe Ltd, Bracetown Business Park, Clonee, Dublin D15 YN2P Ireland
(Notified Body 2777)
Ongoing Assessment Body:
SGS Fimko Oy, Takomotie 8, FI-00380 Helsinki, Finland (Notified Body 0598)
Each anchorage sling is issued with a declaration of conformity & record card, these should be kept safe for future
reference.
APPLICATION AND LIMITATIONS
APPLICATION
These anchorage slings are for use as mobile anchorage points and form part of a work restraint/positioning or fall arrest
system. It is often advantageous to use slings in areas where there are horizontal beams or pipes or other structures (of
sufficient strength and integrity) where they can be looped and used as an anchor point. Follow step 1 to step 3.
Step 1:
Identify a beam or similar horizontal structure strong enough, will not deflect and known to have a strength of
greater than 12 kN. If in doubt DO NOT USE.
Step 2:
Loop the anchorage sling around the beam as shown in figure below. Use connectors if required. Ensure that the
connector is locked tightly.
Step 3:
The hanging connector can now be used as an anchorage point. You can either attach a retractable fall arrestor
as per EN 360, an anchorage line of a guided type fall arrestor as per EN 353-2 or the anchorage hook of the lanyard
into this point.
NB: the anchorage sling must be used for fall protection equipment and not for lifting equipment or persons.
1
2
3
4
5
6
7
12
13
14
8
9
10
11
MARKING
Label on the lanyards, which must be in place, intact and legible while the safety lanyard is in use.
