43
DISKETTE DRIVES OR TYPES MISMATCH ERROR
When the diskette drive type is different from CMOS, please run setup or configure the drive
again.
ERROR ENCOUNTERED INITIALIZING HARD DRIVE
When you can‘t initializes the hard drive, ensure the following things:
1. The adapter is installed correctly
2. All cables are correctly and firmly attached
3. The correct hard drive type is selected in BIOS Setup
ERROR INITIALIZING HARD DISK CONTROLLER
When this error occurs, ensure the following things:
1. The cord is exactly installed in the bus.
2. The correct hard drive type is selected in BIOS Setup
3. Whether all of the jumpers are set correctly in the hard drive
KEYBOARD ERROR OR NO KEYBOARD PRESENT
When this situation happens, please check keyboard attachment and no keys being pressed
during the boot. If you are purposely configuring the system without a keyboard, set the error halt
condition in BIOS Setup to HALT ON ALL, BUT KEYBOARD. This will cause the BIOS to
ignore the missing keyboard and continue the boot procedure.
MEMORY ADDRESS ERROR
When the memory address indicates error, you can use this location along with the memory
map for your system to find and replace the bad memory chips.
MEMORY SIZE HAS CHANGED
Memory has been added or removed since last boot. In EISA mode, use Configuration
Utility to re-configure the memory configuration. In ISA mode enter BIOS Setup and enter the
new memory size in the memory fields.
MEMORY VERIFYING ERROR
It indicates an error verifying a value is already written to memory. Use the location along
with your system's memory map to locate the bad chip.
OFFENDING ADDRESS MISSING
This message is used in connection with the I/O CHANNEL CHECK and RAM PARITY
ERROR messages when the segment that has caused the problem cannot be isolated.
Summary of Contents for CPU-2616 PCI-104
Page 6: ...1 2 Layout 5...
Page 54: ...7 Appendix 7 1 Dimension 53...
