4.4.5 Onboard
Audio
This field specifies the internal Audio Control.
Available Options:
Disable, Enable
Default setting:
Enable
4.5 Peripheral Setup
This section describes the function of peripheral features.
4.5.1 On-Chip Primary IDE Channel 1
This field specifies the IDE channel that can be applied when using IDE hard disk connector.
Available Options:
Disabled, Enable
Default setting
: Enable
4.5.2 Master /Slave Drive PIO mode
IDE hard drive controllers can support up to two separate hard drives. These drives have a
master/slave relationship, which is determined by the cabling configuration used to attach them to
the controller.
PIO means Programmed Input/Output. Rather than have the BIOS issue a series of
commands to affect a transfer to or from the disk drive, PIO allows the BIOS to tell the controller
what it wants and then let the controller and the CPU perform the complete task by them. This is
simpler and more efficient (and faster). Your system supports five modes, numbered from 0 to 4,
which primarily differs in timing. When Auto is selected, the BIOS will select the best available
mode.
30
Summary of Contents for CPU-2616 PCI-104
Page 6: ...1 2 Layout 5...
Page 54: ...7 Appendix 7 1 Dimension 53...
