©JRI
15
VI.
WARRANTY
JRI products carry a one year warranty and guarantee against defects in their components or workmanship.
During this period if any product supplied by the Company proves on inspection to be defective, the Company will at its
own option replace the same or refund to the Buyer the price of the product.
In no circumstances will JRI' liability exceed the price of the product paid by the buyer or the cost of replacement.
JRI shall not in any event be liable to the Buyer for any indirect or consequential loss or damage costs or expenses
whatsoever which might arise out of or in connection with the supply of the product or its consequent use.
Consequently, the products warrantee and guarantee specified above, does not cover damage caused by fair wear and
tear, abnormal storage conditions, incorrect use, accidental misuse, abuse, neglect, misapplication or modification, or
use with non-JRI' hardware/software. No warranty of fitness for a particular purpose is offered and the user assumes
the entire risk of using the product.
In line with our policy of continuous development, we reserve the right to amend our product specification without
prior notice.
VII.
MAINTENANCE CONTRACT
How to optimize your radio frequency installation?
RF measuring systems communicate by radio frequency. However, there may be several factors that can modify the
radio ways already defined, such as moving from a building, adding walls, … Radio frequency requires thus a periodical
follow up performed by specialists.
That’s why JRI has created maintenance contracts. We bring you a global solution which makes your maintenance
easier. This overall service offer includes maintenance and also metrological services, which ensure you that your
system is fully performant.
You won’t worry about your devices maintenance anymore
!
With this maintenance contract you will benefit for a minimal period of 2 years from the following advantages:
- material verification once or twice a year
- warranty extension
- telemaintenance
- telephone assistance
- material replacement on site or by return to our production unit
- metrological certificates: verification of measurement accuracy
- access to new software versions and updates
- on-site intervention within 3 open days after problem identification by our experts
VIII.
ENVIRONMENT PROTECTION
JRI recommends to our customers to throw away their measuring and recording devices which are unserviceable
and/or beyond repair in a way that is appropriate to environment protection. Insofar as the production of waste
cannot be avoided, it is best to re-use them by proceeding with adapted recycling depending on the material used and
considering the environment protection.
RoHS Directive
The ROHS European Directive rules and limits the presence of hazardous substances in electrical and electronic
equipments (EEE).
In the article 2, the scope of this Directive excludes "9. Monitoring and Control Instruments" and our products are part
of this category.
However, our company has decided to apply the whole dispositions of this Directive for all our new electronic devices
which will comply to this 2002/95/CE Directive.
