JRI Spy RF ModeM Wifi, User Manual

Page: 11 / 15

©JRI 11

The Network Configuration window will appear.

Enter the WiFi IP settings in the IPv4 tab of the destination network. To operate optimally, the
Modem WiFi must have static IP address. In static IP mode, fill in all the fields in the « IPv4 » tab
and deselect « Enable AutoIP address assignment ».

Then click on “ Apply ”.
Nota : you need to reboot the module if you want to change the IP address. After
reboot, the le DIGI configurator Digi will become available when entering the new IP
address of the module.

Open the « Wifi LAN Settings » tab.

If the network has been modified (into Connect f. ex), enter the initial network name. Select
« Connect to any available Wifi network », select the country of residence, then click « Apply ».

Open the “Wifi Security Settings” tab