JRI Spy RF ModeM Wifi, User Manual

Page: 13 / 15

©JRI 13

Select the SPY RF WiFi ModeM you want to install (at this stage it is recommended to activate one
modem at a time), then click on «
Next ».

If you cannot see the Modem, click « Refresh ».

Leave the fields « No Ports : » and « starting com » as they are.

Make sure that the default RealPort TCP value is 771. If not, then modify it.

Deselect « Encryption » and « Authentification ». Accept despite the warning message.

At « Default Network Profile » select « TCP ; Typical Settings » if your network is a Local Area Network
(LAN). If not, then choose « TCP : Less Overhead » for a Wide Area Network (WAN).

Click on « Apply », and then « Apply ».