JRC JHS-32B, Instruction Manual

Page: 125 / 152

1
2
3
4
5
6
7
8
9
10
117
MAINTENANCE AND INSPECTION
5.1 Maintenance and Inspection
• Operation mistake. Scanning is disabled ini-
tially, at installation.
• Operation mistake. DW is disabled initially, at
installation.
• Operation mistake. Do not transmit on channels
on which transmission is prohibited.
• Operation mistake.
• Fault in JHS-32B DSC unit.
• Fault in JHS-32B transmitter.
• Fault in JHS-32B receiver.
• Fault in JHS-32B DSC watchkeeping receiver.
• Operation mistake. WX is disabled initially, at
installation.
SCAN DISABLE SCAN key pressed when scan-
ning was disabled.
DW DISABLE DW key pressed when DW was
disabled.
TX DISABLE The PTT switch on the handset
was pressed for a channel on
which TX is prohibited.
UNACCEPTABLE An invalid key was pressed (this
error message is displayed for
one second).
DSC FAULT A fault in the DSC unit.
TX FAULT A fault in the transmitter.
RX FAULT A fault in the receiver.
W.K.R Fault A fault in the DSC watchkeeping
receiver.
CHANNEL DISABLE WX key was pressed with WX
disabled.