JR Vigor CS Assembly Instructions Manual Download Page 47 | Manualshive

Page: 47 / 92

background image

47

The following activation and setup procedure should be used for all JR 8103 and 8103D.T. systems.

Note:

Some early 8103 systems will require the activation of the CCPM software. It’s easy to identify if your system has the
CCPM function activated by identifying if the “SWASH TYP” function appears in the system mode as shown in Section A
below. Please refer to Section A to access the system mode.

Prior to activating the CCPM function, it is first suggested that the data reset function be performed to reset the desired model

number to be used back to the factory default settings.

Caution:

Prior to performing the data reset function, it will be necessary to select the desired model number to be used.

A) Model Select/Data Reset

Press the Up and Down keys simultaneously while turning the power switch on to enter the system mode. Next, press the
Up or Down keys to move the cursor to the model select function. Press the Up and Down keys simultaneously to enter
the model select function. Select the desired model number to be used, then press the Clear key to reset the current
model to the factory default settings. Press the Up and Down keys simultaneously to exit the model select function.

B) CCPM Activation

Press the Up or Down keys to move the cursor to the swash type function, then press the Up and Down keys
simultaneously to access the swashplate type function.

Press the Up or Down keys until “3 servo 120°” appears on the screen. Press the Up and Down keys simultaneously two
times to exit the swashplate type function and the system mode.

CCPM SOFTWARE ACTIVATION AND INITIAL ADJUSTMENT (CONTINUED)

2. JR 8103 SYSTEMS: MANUAL PROGRAM INPUT

[SYSTEM M.]

• INFO-DISP

• Model SEL

• MDL Name

• Type SEL

• MDL Reset

• MODULAT

• TRANSFER

• INPUT SEL

• SWASH TYP

[MDL Reset]

MODEL 1

HELI SPCM

[SWASH TYP]

1servo

NORM

[SWASH TYP]

3servos

120

•

3 servos 120°

«
...
45
46
47
48
49
...
»

Summary of Contents for Vigor CS





























































































Reviews:

No comments

Related manuals for Vigor CS

Brand: BARCLONE Pages: 14

Brand: AeroWorks Pages: 17

Bf 109E-4 interior S.A.

Brand: Eduard Pages: 4

Brand: H-KING Pages: 9

Brand: LEGO Pages: 72

Brand: SL Model Pages: 40

Orc Krushinator Deffstomper Body

Brand: Tabletop Scenics Pages: 20

Brand: Digitrax Pages: 32

My Little Baby Born I Can Swim!

Brand: Zapf Creation Pages: 4

Brand: Fisher-Price Pages: 4

Brand: Phoenix Model Pages: 3

CONVERGENCE VTOL

Brand: Horizon Hobby Pages: 20

Brand: marklin Pages: 32

Obsession Speedboot

Brand: Jamara Pages: 12

2 PRACTICABLE SILOS

Brand: Faller Pages: 4

50cc P-51D Mustang ARF-QB

Brand: AeroWorks Pages: 85

Brand: roco Pages: 56

Magic Wand Laptop

Brand: VTech Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands