9
Device Select code 17 allows the activation of flight modes,
selecting a throttle hold switch, flap trim selection, flight mode
trim selection, and switch selection and activation for all aux
channels. Generally it is recommended for most aircraft to
begin setting up the aircraft by inhibiting all aux channels in
Device Select so that they can be used for dual functions in
the Wing Type menu. Flight modes can be activated in Device
Select; many flyers prefer to use the elevator dual rate switch
as the flight mode switch, though there are several switch
options that can be selected. Extra Flight modes (5 instead of
3) can be activated as well in the Device Select function, using
2 switches combined to select the desired flight mode in flight.
Generally most fliers use 3 flight modes. Flight mode trims
can be activated in Device Select. With Flight mode trims on,
trims will be independent for all flight modes, which allows the
aircraft to be trimmed in each flight mode. If the aircraft requires
different trim settings in each flight mode, activate this function.
Generally most giant-scale aerobatic aircraft do not require
different trim settings for each flight mode, so this is generally
turned off.
Note
: If flight mode trims are active, it will be necessary to
trim the aircraft in all flight modes independently.
1. Press and hold the ENT button while turning on the power
switch to enter the System Mode List screen.
2. Using the roller highlight 17. DeviceSEL and press the
roller to access the Device Select screen.
Device Select
Step 7. Device Select Setup
