26
1. In the Function Mode List screen use the roller to highlight
87. Timer and then press the roller to access the Timer
screen.
2. Rotate the roller and highlight Timer1:INH and press the
roller to access the available timer types. (DOWN-T, STOP
W or INH)
3. Rotate the roller to highlight DOWN-T then press the roller
to access timer options.
4. Rotate the roller to highlight START TIM KEY then press the
roller to access the switch that will activate the timer. Rotate
the roller to select SPS0 then press the roller to program
accept that value SPS0 Switch position.
5. Rotate the roller to highlight Set Time then press the roller
to access the pre-programmed time. Rotate the roller to
select the desired down time (typical flight time) then press
the roller to program accept that value.
6. Rotate the roller to highlight One Time: OFF then press the
roller to turn this function on. Note: the one time function
will turn the timer on when the throttle is raised and remain
on even when the throttle is reduced to idle.
7. Press the LIST button to exit the SPS screen and return to
the System Mode List.
8. The timer will now start when the throttle advanced.
9. To reset the timer from the Timer screen, highlight Down-T
and press the clear button.
Timer Programming
