45
1. In Function Mode List screen use the roller to highlight 18.
THRO CURV and press the roller to access the all servos
hold screen. Press YES or NO to access the Throttle Curve
screen.
2. Move the flight mode switch to the desired flight mode that
you wish to adjust the throttle curve (normal, stunt 1 or
stunt 2).
3. Rotate the roller to highlight the desired point that you wish
to change (L, 1 or H) then press the roller to access that
point.
4. Rotate the roller to adjust to throttle curve at the selected
point. Repeat this process for all flight modes by moving
the flight mode switch in the desired position. Additional
points can be added by moving the throttle stick to the
desired area of the curve until STOR appears on the lower
left corner of the screen. Pressing the STOR button will then
add an additional point to the curve at this location, which
can then be adjusted as mentioned above.
1. In Function Mode List screen use the roller to highlight 68.
PIT. CURV and press the roller to access the all servos hold
screen. Press YES or NO to access the Pitch Curve screen.
2. Move the flight mode/ hold switch to the desired flight
mode that you wish to adjust the pitch curve (normal, stunt
1, stunt 2 or hold).
3. Rotate the roller to highlight the desired point that you wish
to change (L, 1 or H) then press the roller to access that
point.
4. Rotate the roller to adjust to pitch curve at the selected
point. Repeat this process for all flight modes by moving
the flight mode/ hold switch in the desired position.
Additional points can be added by moving the throttle
stick to the desired area of the curve until STOR appears
on the lower left corner of the screen. Pressing the STOR
button will then add an additional point to the curve at this
location, which can then be adjusted as mentioned above.
Step 17. Programming Pitch Curves
Step 16. Programming Throttle Curves
