72
1. In FUNC.LIST, rotate the Selector until D/R & EXP is
highlighted. Press the Selector to access the Dual Rate and
Exponential menu.
2. Rotate the Selector to highlight the channel (aile, elev or
rudd) then press the Selector to select the desired channel
that you wish to adjust the dual and expo rates for. Rotate to
select then press the Selector to store the desired channel.
3. Note that five D/R and EXPO positions (values) are available
(Pos0, 1, 2, 3 and 4). Under AUTO on the right of the
screen, rotate the Selector until LAUN is highlighted and
press the Selector. Select Pos0 as the active position for the
launch mode by rotating the Selector and then pressing the
Selector when Pos0 is highlighted. This will automatically
access dual rate and expo values that are programmed into
position 0 whenever the launch mode is selected.
4. Now rotate the Selector to Pos0 and depress the Selector
to highlight the D/R values. Rotating the Selector changes
these values. Displacing the aileron stick right or left allows
the dual rate to be independently adjusted in each direction.
Depress the Selector to store the desired D/R values.
5. Rotate the Selector to the EXP Pos0 values and adjust these
values in the same manor pressing the Selector to store the
desired value.
6. Now return to the selected channel and do the same thing
for the two remaining channels. Press the LIST button to
return to the Function Mode screen.
This function is normally not used in Land mode. It was
addressed above in setting up the Cruise mode.
This function is normally not used in Land mode. It was
addressed above in setting up the Launch and Cruise modes.
Step 32. Dual Rate and Exponential
Step 33. Elevator-to-Flap Mix
Step 33. Aileron-to-Flap
