30
1. In the Function List screen use the roller to highlight 66.
FLAP System and press the roller to access the FLAP
System screen.
2. Determine if you want to use the Auto Land Function. If you
do not wish to use this feature, skip to number 4. If you
would like to use this feature, rotate the roller to highlight
INH under Auto Land and press the roller to activate.
3. Rotate the roller to highlight THRO under Auto Land and
press the roller. Rotate the roller to increase the auto land
setting to 95%. It is recommended that the throttle position
be set very high at first (between 90–99%) to give the
aircraft a chance to regain some speed before the Flaps
actually retract. As the Flaps retract, lift will decrease and
the stall speed of the aircraft will increase and may cause
a crash if the airspeed is too low. When there is a missed
approach, advance the throttle slowly up to about 90% and
wait until the aircraft picks up some speed before advancing
the throttle to full, causing the Flaps to retract. Press the
roller to set the value.
Step 3. Flap System Programming
