6
7
System Features
System Specifications
Transmitter
• 3 channels
• Synthesized PLL Channel Selection via software
• FM modulation
• Easy-to-read LCD graphics display
• 10-model memory
• 3-character model name entry
• Electronic digital trim levers for throttle and steering
• Two assignable electronic grip levers
• Auxiliary third channel accessible through
Grip Lever A
• Direct display trim functions
• Servo reversing
• Sub-trim
• Steering dual-rate
• Exponential (steering and throttle)
• Steering end-point adjustment
(two points: left and right)
• Brake/throttle end-point adjustment
• Throttle deadband adjustment
• 50-lap timer
• Low-battery alarm
• Charge jack receptacle (rechargeable batteries not
included; order JRPB958)
RS310 Receiver
• 3 channels
• Synthesized PLL Channel Selection
• FM modulation
• 27MHz/75MHz available
• Patented ABC&W interference technology
Z590M Servo
• Metal gears for durability
• Great high-torque car/buggy steering servo
• Indirect drive feedback potentiometer for additional
vibration protection
• Surface Mount Technology (SMT)
Z270 Servo
• Low current drain
• Indirect drive feedback potentiometer for additional
vibration protection
• Surface Mount Technology (SMT)
• Durable nylon gear train
Components
Transmitter
XS3 PRO
Receiver
RS310
Servos
Z590M x 1
Z270 x 1
Accessories
Switch harness with battery
case, servo accessories
(for each servo), instruction
manual
XS3 PRO Transmitter
Model number
XS3 PRO
Encoder
3-channel computer system
RF output
27MHz/75MHz synthesized
Modulation
FM
Output power
130 mW
Current Drain
180 mA
Power source
1.5V x 8 dry cell
(1.2V x 8 Ni-Cd optional)
Output pulse
1000–2000 (1500 neutral)
RS310 Synthesized Receiver
Model number
RS310
Type
3-channel, FM, ABC&W
circuitry
Frequency
27MHz/75MHz
Sensitivity
5
μ
V/m
Selectivity
8 KHz/50 dB
Weight
.63 ounces
Size (LxWxH)
1.49” x 1.14” x 0.63”
Receiver Antenna
20”
Power supply
4.8–6.0V DC
Channel selection
Rotary dial
Z270 Servo
Torque
49 ounce inch (@6.0V)
Speed
.19 sec/60° (@6.0V)
Weight
1.50 ounces
Size (WxLxH)
0.73” x 1.51” x 1.37”
Motor
3-pole ferrite
Gears
Nylon
Z590M Servo
Torque
85 ounce inch (@6.0V)
Speed
.15 sec/60° (@6.0V)
Weight
1.6 ounces
Size (WxLxH)
0.73” x 1.55” x 1.46”
Motor
3-pole ferrite
Gears
Metal
Optional (not included)
JRPB958
Tx NiCD Battery (700Mah)
JRPC222
Tx/Rx Charger
