28
29
Function Mode
Lap-Timer
The Lap-Timer function of the XS3 PRO allows the
recording of individual lap times based on a 999 second
up-timer. Up to 50 laps and times from 3.0 to 99.9 seconds
can be stored in memory for review at a later time. The Lap-
Timer function will only be enabled and shown in Function
mode if Grip Button C (System Mode) is set to “LA.” With
the Lap-Timer enabled, pressing the
Channel
key will
alternate between the Normal display screen and Up-Timer
display screen.
The Lap-Timer is started by pressing Grip Button C. Once
active, as shown by the blinking word “LAP,” pressing Grip
Button C again will begin recording the time of the next lap.
Note
: A 3.0 second lap is the quickest lap allowed.
This prevents accidental double pushing of Grip
Button C when recording lap times. If more than
50 laps are recorded, each new lap will overwrite the
oldest lap held in memory.)
To stop the Lap-Timer, press the
Increase
and
Decrease
keys at the same time. To restart the Lap-Timer, press Grip
Button C. To reset the Up-Timer, press the
Channel
key
to show the Up-Timer display screen. With the Up-Timer
stopped, press the
Increase
and
Decrease
keys at the
same time to reset.
To review or reset lap times you must be in the Lap-Timer
function mode screen. Upon entering this function, the
screen will always show the last lap time recorded. Use the
Increase
or
Decrease
keys to view the desired lap(s).
Note
: If a recorded lap time is greater than 99.9
seconds, “OVR” will be displayed.)
To reset all lap times, press the
Increase
and
Decrease
keys at the same time.
Accessing The Lap-Timer Function
1.
Turn on the transmitter power switch.
2.
Press the
Scroll
key to enter Function mode.
3.
Press the
Scroll
key until “LAP” appears in
the screen.
4.
Press the
Increase
or
Decrease
keys to view the
desired lap time(s).
5.
To reset all lap times press the
Increase
and
Decrease
keys at the same time.
6.
Press the
Scroll
key to access the Sub-Trim function.
7.
To exit the Function mode, either turn off the
transmitter power switch or press the
Scroll
and
Channel
keys at the same time.
401
20
L A P
Recorded Lap
Time to 1/10th of
a second
(i.e. 40.1 sec.)
Current
Lap Number
A minus sign indicates a pre-existing lap. Current lap times have no sign.
—
Press the
Scroll
key until “LAP” appears
on the screen.
Press the
Increase
or
Decrease
keys to view the
desired lap time(s).
SCROLL
ENTER
CHANNEL
INCREASE
CLEAR
DECREASE
