16
17
Synthesized Channel Select cont.
Accessing the TX Channel Select Function
1.
Press the
Scroll
and
Channel
keys at the same time
and hold.
2.
Turn the transmitter power switch on to enter System
mode.
3.
Press the
Scroll
key until “CH” appears on the screen.
4.
Press the
Increase
or
Decrease
key to select the
desired channel number 1–6 (27MHz) or 61–90
(75MHz).
5.
Press the
Scroll
key to access the Model Name
Entry function.
6.
To exit System mode, either turn the transmitter
power switch off or press the
Scroll
and
Channel
keys at the same time.
Accessing the RS310 RX Channel Select
Determine the frequency band and channels available
marked next to the rotary dial matches the transmitter.
Set the channel on the RS310 receiver to match the XS3
PRO transmitter by adjusting the ten position rotary
switches using the tuning screwdriver supplied until they
point to the corresponding channel numbers.
• To set a 75MHz receiver to channel 78, rotate the
first rotary switch to the “7” position and the second
rotary switch to the “8” position.
• 27MHz receivers will only have one rotary switch for
accessing channels 1–6. Use this single switch to
select the desired channel.
System Mode
Model Name Entry
The XS3 PRO allows a three-character name to be input for
each of the ten models available. The current model with
name will then be displayed in the Normal display screen.
This feature is useful to help identify different models,
setups, etc.
Accessing the Model Name Entry Function
1.
Press the
Scroll
and
Channel
keys at the same time
and hold.
2.
Turn on the transmitter power switch to enter the
System mode.
3.
Press the
Scroll
key until “MD1” appears on the
screen with the first character flashing.
4.
Press the
Increase
or
Decrease
keys to select the
correct letter/number for the first character (flashing).
To clear the character, pressing the
Increase and
Decrease
keys at the same time.
5.
To change the remaining two characters, press the
Channel
key until the desired character to be changed
is flashing.
6.
Press the
Scroll
key to access the Frame Rate
function.
7.
To exit the System mode, either turn the transmitter
power switch off or press the
Scroll
and
Channel
keys at the same time.
Press and hold the
Scroll
and
Channel
keys at the
same time while turning transmitter power switch
on. Next, press the
Scroll
key until the flashing
“M” appears. Press the
Channel
key to select the
character to be changed.
Press the
Increase
or
Decrease
keys to select the
correct letter/number to be used.
Press and hold the
Scroll
and
Channel
keys at the
same time while turning transmitter power switch
on. Next, press the
Scroll
key until “CH” appears.
Press the
Increase
or
Decrease
key to select the
desired channel for transmission.
md !
1
Character to
be Adjusted
Current Model
Number
SCROLL
ENTER
CHANNEL
INCREASE
CLEAR
DECREASE
SCROLL
ENTER
CHANNEL
INCREASE
CLEAR
DECREASE
