28
29
Function Mode
Accessing the Sub-Trim Function
1.
Turn on the transmitter power switch.
2.
Press the
Scroll
key to enter Function mode.
3.
Press the
Scroll
key until “TRIM” appears in small
letters to the left of the screen.
4.
Press the
Channel
key to select the channel to be
adjusted (Steering, Throttle or Auxiliary Channel 3).
5.
Press the
Increase
or
Decrease
keys until the proper
servo position is achieved.
6.
Press the
Scroll
key to access the Servo
Reversing function.
7.
To exit the Function mode, either turn off the
transmitter power switch or press the
Scroll
and
Channel
keys at the same time.
Sub-Trim
The Sub-Trim function of the XS3 PRO is an electronic
trimming feature that allows the neutral position of the
servo on either the steering, throttle or auxiliary channel
(optional) to be moved, while allowing the electronic trim
lever for that channel to remain in the center position.
This feature is very useful as it allows the servo arm/
wheel position to be moved to help with control linkage
installation, eliminating the need to make mechanical
linkage adjustments.
Although the Sub-Trim function is a very useful feature, it
is suggested that only small amounts of sub-trim be used
so that no unwanted, non-equal servo travel is created. It
is suggested that less than 30 points of Sub-Trim be used
during adjustment. If more than 30 points of Sub-Trim
are required, it is suggested that a mechanical linkage
adjustment be performed.
Press the
Scroll
key until “TRIM” appears on the
screen. Press the
Channel
key to select the desired
channel to be adjusted.
STS = Steering
THS = Throttle
AUS = Auxiliary Channel 3
Press the
Increase
or
Decrease
keys to achieve
the desired Sub-Trim Value.
sts
0
T R I M
Current Channel
STS = Steering
THS = Throttle
AUS = Auxiliary
Channel 3
Current Value
Values: R/B 125 0 R/F 125
SCROLL
ENTER
CHANNEL
INCREASE
CLEAR
DECREASE
