manualshive.com logo in svg

JPS RTU-292C, Installation And Operation Manual

Share
Download
JPS RTU-292C Installation And Operation Manual Download Page 77

RTU-292C Operations Manual 

 

        

 

 

 

 

 

4-17 

4.4.15

 

Time/Date Response 

 

%dd-MON-yy hh:mm:ss <CR> 

 
Type:   

Synchronous. 

Response To:  TIME or DATE Command. 
 
This response indicates the current Time and Date for the RTU-292C internal clock. 

Note: the Call 

Logging Feature must be enabled before use.  See 3.7.12.

 

 
Examples: 
%01-MAR-98 11:05:20 <CR> ; Status returned indicating that the date is March 1

st

 

‘98, and the time is 

 

 

 

 

 

 

         ;11:05 and 20 seconds in the morning. 

 
%05-DEC-97 14:18:30 <CR> ; Status returned indicating that the date is December 5

th

  

‘97, and the 

time is    

 

 

 

        ; 2:18 and 30 seconds in the afternoon. 

 
The strings representing the month are: 
   JAN, FEB, MAR, APR, MAY, JUN, JLY, AUG, SEP, OCT, NOV, DEC 
 
 

4.4.16

 

Version Response 

 

%VER  a.bb  Exx <CR> 

 
Type:   

Synchronous. 

Response To:  Version Command. 
 
This response gives the RTU-292C firmware version data.  The data is in the format "a.bb" where "a" is 
the major version (0-9), and "bb" is the minor version (00-99). 
 
Example: 
 
^ VER  <CR> 

 

; Command sent to the RTU-292C asking for the version data. 

%VER 2.00  E0 <CR>  ; Status returned from the RTU-292C showing version 2.00 with no errors. 
 

Summary of Contents for RTU-292C





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands