RTU-292C Operations Manual
2-23
2.11
INSTALLATION CHECKLIST
Table 2-20
Installation Checklist
Provide suitable
Mounting and Cooling.
See Section 0.
Make
Interconnections.
See Section 2.9for External Interconnect Information.
Serial Remote Control
needed?
Set Serial Remote Baud Rate with SW1-1 and 2. See RS-
232 protocol in Section 4.
Set
TX/RX Audio Levels
if necessary.
Set
Telephone Line Levels
if necessary.
Are other
Factory Default Settings
correct for
this system?
and
Make necessary changes as explained in Sections 0, 2.10,
and 3.7
2.12
OPTIONS INSTALLATION AND CONFIGURATION
See Section 6 for installation instructions for all field-installable options. Section 6 also explains
how to set-up any options that have configuration switches, jumpers, potentiometers, etc. For
any options not covered in Section 6, refer to custom notes supplied with the RTU-292C or the
option, or contact us for information.
End of Section 2
Summary of Contents for RTU-292C
