manualshive.com logo in svg

JPS RTU-292C, Installation And Operation Manual

Share
Download
JPS RTU-292C Installation And Operation Manual Download Page 70

 

             

RTU-292C Operations Manual

 

 

 

 

 

 

4-10 

4.3.15

 

Time Command 

 

TIME <hhmmss>  <CR> 

 
This command is used to check or set the time on the RTU-292C internal clock.  If no parameters are 
given the command simply returns the time/date.  The parameter format is hour (00-23), minutes (00-
59), seconds (00-59).  The time is set and displayed in 24-hour format. 

Note: the Call Logging Feature 

must be enabled before use.  See 3.7.12.

 

.

 

 
Expected Response:  Time/Date Response. 
 
Examples: 
 
TIME  <CR>      ; Command requesting the current time and date from the RTU-292C. 
%01-MAR-98 11:05:20 E0 <CR> ; Status returned indicating that the date is March 1

st

 

‘98, and the time 

is    

 

 

 

 

  ;11:05 and 20 seconds in the morning. 

 
TIME 141830 <CR>          ; Command to set the time to 2:18 and 30 seconds in the afternoon. 
%05-DEC-97 14:18:30 E0 <CR> ; Status returned indicating that the date is December 5

th

  

‘97, and the 

time is    

 

 

 

 

 ; 2:18 and 30 seconds in the afternoon. 

 

 

4.3.16

 

Software Version Command 

 

VER <CR> 

 
This command is used to determine the version of the RTU-292C firmware.  The command requires no 
parameters. 
 
Expected Response:  Version Response. 
 
Example: 
 
VER <CR> 

 

; Command sent to the RTU-292C. 

%VER 2.00 E0 <CR> 

; Status returned from the RTU-292C. 

 
This status indicates that the CPU software version is 2.00. 

Summary of Contents for RTU-292C





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands