Joyner JNSZ1100SVB, Owner'S Manual, Page: 83 / 228

6.3. Installation of new lubricating oil collecting and
filtering device, oil pump collecting and filtering
device
[Torque] 6
±
1N.m
6.4. Assembling of oil pan
6.4.1. Clear the mating surface with the cylinder body
6.4.2. Apply sealing silica before assembling
[Grease] Letai 5699
Attention
·
The liquid cushion with silica line diameter of
ф
3-4mm, without any broken section
·
Make the assembly in 15 minutes after the
application of silica
6.4.3. Tighten in the sequence shown in the right
figure with the torque of 6
±
1N.m from the center to
the two sides
Front
Rear