Joyner JNSZ1100SVB, Owner'S Manual, Page: 217 / 228

216
4.Attach tie rod end and front wheel
4
fo
rw
ard
3
1
steering cross rod
2
left wheel axle,front
4
02.S650.03.01.0002 S650.03.01.00.02 wheel nut M12*1.5
8
3
02. S650.03.01.01.00A S650.03.01.01.00A Left wheel(27*8-12)
1
2
02.D800.05.01.0001 D800.05.01.00.01 rod end bearing,POSA12LH
1
1
02. S650.03.01.04.00A S650.03.01.04.00A right wheel(27*8-12)
1
No. Erp code Part name Description Q'ty
1. Install the shaft of outer tie rod end-2 to left wheel axle,front.
2. Install bolt,spacer sleeve,then tighen nut.
Note: don't adjust outer tie rod end as wheel alignment is done before packing.
3. Attach the wheel(27*8-12),FL-3 on the hub, tighten the nuts.
4. Attach the wheel(27*8-12),FR-1 as described above .