en
9
Installation
Indications,
functions and options
Messages
Operation and function
3 Operation and function
3.1 Buttons
2 backwards (-)
1 forwards (+)
3
(selection /
CONlRMATION
Operating control
LED
The controller is operated via the 3 push buttons below the display.
Button 1 (+)
- Scrolling forwards, increasing adjustment values.
Button 2 (-)
- Scrolling backwards, reducing adjustment values.
Button 3 (OK)
-
CONlRMINGSELECTING
During normal operation, display channels will be displayed.
Î
In order to scroll between display channels, press buttons 1 and 2.
Access to adjustment channels:
Î
Use button 1 in order to scroll to the last display channel, then press and hold
down button 1 for approx. 2 s.
If an
adjustment channel
is shown on the screen,
will be displayed on the
right-hand side next to the channel name.
Î
Press button 3 in order to select an adjustment channel.
STARTSmASHING
Î
Adjust the desired value with buttons 1 and 2.
Î
"RIEmYPRESSBUTTON
permanently appears, the adjusted value has been saved.
4 System-Monitoring-Display
System-Monitoring-Display
The System-Monitoring-Display consists of 3 blocks: channel display, tool bar and
system screen.
Channel display
The channel display consists of 2 lines. The upper display line is an alphanumeric
16-segment display. In this line, mainly channel names and menu items are displayed.
In the lower 16-segment display, values are displayed.
Tool bar
The additional symbols in the tool bar indicate the current system state.
Summary of Contents for DeltaSol BS/2 HE
Page 23: ...23 en ...
