Jøtul GI 350 DV, Installation And Operation Instructions Manual

Page: 6 / 32

6
Safety Information
„
Due to the high operating temperatures this
appliance should be located out of traffic and
away from furniture, draperies, etc. Maintain
proper clearance to combustible mantels and
fireplace trim.
„
Children and adults should be alerted to the
hazards of high surface temperatures and should
stay away to avoid burns or clothing ignition.
„
Young children should be supervised while they
are in the same room as the fireplace.
„
Clothing or other flammable materials should not
be placed on or near the fireplace.
Surveiller les enfants. Garder les vêtements, les
meubles, l’essence ou autres liquides à vapeur
inflammables lin de l’appareil.
„
Never allow anyone to use the fireplace if they are
unfamiliar with its operation.
„
NEVER store or use gasoline or any other flam-
mable vapors or liquids in the vicinity of the
fireplace.
„
Never burn any solid materials (wood, cardboard,
paper, coal, etc.) in this gas fireplace. Use with
natural gas or propane fuel ONLY.
„
Any safety screen, glass or guard removed for
servicing the appliance must be replaced prior to
operating the appliance.
„ „
„ „ „
Do not slam or strike the glass panel.
„ „
„ „ „
This appliance is NOT for use with aftermarket
glass doors. This appliance is approved for use
only with the door facings, surround panels and
glass panel options listed on page 4 of this
manual.
Cet appareil ne sert pas avec des portes en verre
de marché des accessoires. Cet appareil est
approuvé pour l’usage seulement avec les
revêtements de porte, entoure les options de
panneau et en verre de panneau énumérées à la
page 4 de ce manuel.
„ „
„ „ „
Wear gloves and safety glasses while performing
maintenance procedures.
Electrical Hazards
„ „
„ „ „
Be aware of electrical wiring locations when
cutting holes in walls and ceilings for termination.
„ „
„ „ „
The Jøtul GI 350 DV Blower must be electrically
grounded in accordance with local codes or, in the
Installation Requirements
The Universal GI 350 DV Gas Insert can be installed in
most solid fuel burning fireplaces of either masonry
construction or a prefabricated factory built fireplace.
Prior to any installation, the existing chimney
exhaust flue must be thoroughly cleaned and
completely inspected by a qualified chimney sweep
or fireplace service person.
Do not install this insert into a chimney that is
damaged. Any repairs must be made prior to install-
ing the insert. If you are unsure of the condition of
your fireplace and chimney, contact a professional
fireplace technician or your local authorized Jøtul
dealer for professional assistance.
DO NO DO NO
DO NO DO NO DO NOT R
T R
T R T R T REM
EM
EM EM EMO
O
O O OVE B
VE B
VE B VE B VE BR
R
R R RIC
IC
IC IC ICK
K
K K KS OR M
S OR M
S OR M S OR M S OR MOR
OR
OR OR ORT
TT
T TAR FR
AR FR
AR FR AR FR AR FRO
O
O O OM
M
M M M
T TT
T TH
H
H H HE FI
E FI
E FI E FI E FIR
R
R R REPL
EPL
EPL EPL EPLA
A
A A AC
C
C C CE OR C
E OR C
E OR C E OR C E OR CH
H
H H HIMN
IMN
IMN IMN IMNE
EE
EEY S
Y S
Y S Y S Y ST
TT
T TRUC
RUC
RUC RUC RUCT
TT
T TU
U
U U UR
R
R R RE.
E.
E. E. E. However,
masonry or steel may be removed from the smoke
shelf and adjacent damper frame area to accommo-
date installation of a chimney liner, provided that
their removal will not weaken the structure of the
fireplace or chimney, and will not reduce protection
for combustible materials.
If If If If If the fir the fir the fir the fir the fireplac eplac eplac eplac eplace has been modified e has been modified e has been modified e has been modified e has been modified ttttto ac o ac o ac o ac o accccccom- om- om- om- om-
moda moda moda moda modate installa te installa te installa te installa te installation, tion, tion, tion, tion, use anchors or masonry nails to
attach the metal Fireplace Conversion Notice Plate to
the back wall of the masonry fireplace firebox where
it will be readily seen should the insert be removed.
THIS APPLIANCE MUST NOT BE CONNECTED TO A
CHIMNEY OR FLUE SERVING ANY OTHER APPLIANCE
OF ANY KIND.
All venting components must be installed in
accordance with the terms of their listing and
manufacturer’s instructions. Refer to the pipe
manufacturer’s instructions for proper pipe clear-
ances.
This fireplace insert is specifically designed for
use with 3” Type B vent pipe components or a Listed
Flexible gas liner.
absence of local codes, with the current ANSI/
NFPA 70, National Electrical Code or CSA C22.1-
Canadian Electrical Code.
„ „ „ „ „
The GI 350 DV Blower is supplied with a three-
prong (grounding) plug for protection against
shock hazard and should be plugged directly into a
properly grounded three-prong receptacle. DO
NOT CUT OR REMOVE THE GROUNDING PRONG
FROM THE PLUG.
„ „ „ „ „
Always disconnect the power supply when per-
forming routine service on the fireplace.