jotron RA-7203C, Operator'S Manual

Page: 54 / 88

Jotron AS| TR7750C: Operators Manual

Operating Instructions Page 5-4
P/N: 84748 (G)
5.4 Setting, information and configuration menus – transmitter
Under the menu selection from the user menu, various submenu groups are available depending on
the user level.
The submenus and details for them are shown in the tables below.
Submenu Access level Description
Radio control
►
SysOp, Technician Access to operation mode, low power level, climax offset
parameters, modulation and standby settings.
TX config
►
SysOp Access to configuration parameters for modulation, audio
settings, key (PTT) settings and internal calibration
settings.
Interface config
►
SysOp Access to configuration parameters for the ethernet interface,
RS232 port, RS485 port, various pin settings on the hardware
interface (remote connectors) and the user access level.
Bite system
►
SysOp, Technician Displays information about active alarms and gives the
user access to internal measurements.
System info
►
All Displays information about the firmware and hardware
release, system up-time and radio identification
Table 5.4-1, Submenus available on the transmitter