jotron RA-7203C, Operator'S Manual, Page: 47 / 88

Jotron AS| TR7750C: Operators Manual

Installation Page 4-19
P/N: 84748 (G)
Table 4.7-2, Transceiver, Remote (2W) interface
Figure 4.7-3, Transceiver, Remote configuration with 4 wire audio interface
Step Description Reference
1 For audio line interfaces refer to the reference
4.6.2
– Audio interface
3 Set Audio output source to Lineout (receiver)
5.9.2 - RX config group
4 Set Audio input source to line (transmitter)
5.5.2
– TX config group
5
Set Keying source to include txkeygnd ( or other signal if
desired)
5.5.2
– TX config group
6 Connect a coax cable (RG58 or better) between the TA
– Receiver
antenna connector (BNC) and the antenna input on the receiver.
Alternatively, use separate antennas for the TA and RA.
3.2.2 and 3.4.1