61
- 76
minimate
plus
48
47
46
Fig. 46: Gently screw the ionising tube
holding on to the base (green part).
If the operation is difficult to perform,
pull slightly the earthing spring so that
it is not in contact with the surface of
the tube.
Check that the earthing
spring is in contact with
the outer mesh once the
ionising tubes have been
screwed back into place.
Otherwise contact the
manufacturer.
ATTENTION: do not
overtighten the screw after
reaching its end stop.
Fig. 47: Reposition the panel that protects
the fan using the retaining screws.
Fig. 48: Check that the magnetothermic
switches for disconnection of the fan
power supply (Q1) and for disconnection
of the auxiliary power supply (Q2) are in
the ON position.
Summary of Contents for minimate plus
Page 74: ...74 76 minimate plus NOTES...
Page 75: ......
