Jonix minimate plus, Use And Maintenance Manual

Page: 23 / 76

23 - 76
minimate plus
12
11
10
5
5
Fig. 10: Gently tighten the ionising pipe
by gripping it at the base (green part),
positioning it in its seat above the fan.
If the operation is difficult to perform, pull
slightly the earthing spring so that it is not
in contact with the surface of the tube.
Check that the earthing spring
is in contact with the outer
mesh once the ionising tubes
have been screwed back into
place. Otherwise contact the
manufacturer.
ATTENTION: do not overtighten
the screw after reaching its end
stop.
Fig. 11: Reposition the panel that protects
the fan using the retaining screws.
Fig. 12: Check that the magnetothermic
switches for disconnection of the fan
power supply (Q1) and for disconnection
of the auxiliary power supply (Q2) are in
the ON position.