Jonix 70JONIXUPIN, Use And Maintenance Manual

Page: 45 / 60

45
JO NIX
up in
60
58
59
Fig. 59A
Fig. 60: Remount the locking plate by
screwing in the fixing screws.
Fig. 59: Gently screw the new ionizing tube
on the base (green part). If the operation is
difficult, pull the earthing bracket slightly so
that it does not make contact with the pipe
surface.
Fig. 58: Gently unscrew the ionizing tube
by grasping it at the base (green part).
Check that the earthing spring
is in contact with the external
mesh once the ionizing tubes
have been screwed back into
place. Otherwise contact the
manufacturer.
ATTENTION: do not
overtighten the screw after
reaching its end stop.
If the operation is difficult, pull
the earthing bracket slightly so
that it does not make contact
with the pipe surface.