Jonix 70JONIXUPIN, Use And Maintenance Manual

Page: 36 / 60

36
JO NIX
up in
OFF
29
OFF
30
28
Fig. 28: Remove the external cover which
is fixed with interlocking pins.
Pull by grasping the cover sideways to
remove it.
Fig. 30: Disconnect the power supply by
acting on the safety thermomagnetic circuit
upstream of the device.
Make sure that the power supply cannot be
accidentally restored.
Fig. 29: Turn the device off by turning the
0/I switch to the 0 position.
10.2.1 Cleaning ionizing tubes
The device
JO NIX
up in
signals the need to clean the ionizing tube every 1000 hours of operation
(factory setting) through the red led that flashes fast, i.e. 1 second on and 1 second off.
The 1000 hours of operation can be changed via the optional EVO display (see Chapter 9 "Optional
EVO DISPLAY").
Clean the ionizing tubes whenever required.