Jonix 70JONIXUPIN, Use And Maintenance Manual

Page: 28 / 60

28
JO NIX
up in
CONN. FUNCTION
I1 ACTIVATION FUNCTION 1 - IONIZATION
I2 ACTIVATION FUNCTION 2 - IONIZATION
I3 ACTIVATION FUNCTION 3 - IONIZATION
I4 ACTIVATION FUNCTION 4 - IONIZATION
I5 EXTERNAL ALARM
I6 REMOTE ON/OFF
I7 SPEED 1 ACTIVATION - VENTILATION
I8 SPEED 2 ACTIVATION - VENTILATION
I9 SPEED 3 ACTIVATION - VENTILATION
I10 ALARM RESET
UP -
O1 -
O2 -
O3 -
O4 -
O5 -
O6 LED ALARM ON/OFF
O7 ON/OFF IONIZATION
A1 MODULATING FAN 0-10V
A2 ON/OFF IONIZATION (0V = OFF; 10V= ON) for solid state relay command
A3 -
The
JO NIX
up in
device is equipped with an electronic control board that allows to change the
fan speed settings and to modify the functions available for the ionization device. These changes
can be set:
- by modifying the wired internal jumpers directly on the circuit board to the factory default
settings;
- by means of an external remote push button excluded from the supply which must be made by
the installer.
8 - MANAGEMENT OF
JON IX
up in
E OPERATING LOGIC
8.1 ELECTRONIC BOARD INPUT/OUTPUT
Any change must be carried out by qualified and authorized personnel.