7
1.6 Fireplace operation
7
1.6.1 Starting with wood
1.6.2
Electronic controller
The electronic controller is arranged for controlling the room air
fan, in order to set the optimum air flow level.
The ventilation level can be set manually by the user or
automatically.
In automatic setting (possible in the version with temperature
probe), the ventilation is set according to the fireplace
temperature.
A fan operation mode is provided, even with the fireplace off,
for room ventilation.
The user interface is in the wired version, already arranged for
the radiofrequency version.
Through the interface it is possible to set the various operation
modes and identify any faults.
Room temperature display (with remote control only).
Increase selected value
in manual programme
Decrease selected value
in manual programme
- Summer/Winter mode change
- Automatic fan speed display
DISPLAY
No communication with fireplace
(with remote control only)
The controller is arranged for
remote control link
norF
Operation programme
AU
=
Automatic
LX
=
manual with ventilation
level X (1-9)
OF
=
Off
RF reception in progress
Winter mode (if the controller is not present
Summer mode is set)
Off/Manual/Automatic operation
Programme change
• Clean the fire bed and empty the ash pan
• On the display, choose winter through the correct button.
Press P and select the fan modality desired: Automatic or
Manual.
For detailed information on the Controller operation
,
see the SM/032 Card supplied.
• Fully open the grille on the ash pan.
• Prepare the wood and light the fire (it is advisable to use
firelighters or similar products)
• Close the door.
Fireplace heat output and load burn time are regulated by the
amount of combustion air; to adjust the amount, adjust the primary
air (opening or closing the ash pan grille).
To obtain a heating power of 23 Kw it is necessary to burn
5-6 kg of wood per hour.
Summary of Contents for UNIVERSAL JOLLY Maxi
Page 23: ...21 NOTES ...
