manualshive.com logo in svg

Jolly Mec UNIVERSAL JOLLY Maxi, Installation, Use And Maintenance Card, Page: 13 / 24

Share
Download
Jolly Mec UNIVERSAL JOLLY Maxi Installation, Use And Maintenance Card Download Page 13

11

11

1.9  Installation and maintenance card use and keeping

•  Card recipients 

The installation and maintenance card is intended for users responsible for fireplace operation; particular attention must be paid the parts 

concerning safety.

•  Purpose of the card

The card contains information on correct use of the fireplace, according to the purposes for which it was designed and built.

It also provides information on weights, commissioning, repair and maintenance of the fireplace, in conformity with the limits set by the 

manufacturer, inside the card.

•  Keeping the card

The installation and maintenance card is an integral part of the fireplace and must be kept until scrapping of the same.

It must be kept in a safe and dry place away from direct sunlight, and near the fireplace so that it is always readily available for reference.

Should the manual get damaged, the user must request a copy from the retailer where he purchased the appliance.

•  Updating the card

The installation and maintenance manual reflects the state of the art at the time the fireplace was marketed. The Manufacturer reserves 

the right to make changes to the fireplace, and consequently to the relevant card, without having to update previous editions.

The user can always request information and updates which, when issued, become an integral part of the installation and maintenance 

card.

If selling or transferring the fireplace, the user is requested to also give the new owner the card and in any case to inform the Manufacturer, 

so that the new owner can receive subsequent supplements.

•  Cases relieving the Manufacturer from liability

The Manufacturer is relieved from any liability in the following cases:

 

a)

  improper use of the fireplace.

 b)

  use not envisaged by specific national regulations.

 c)

  incorrect installation.

 

d)

  feed faults.

 e)

  failure to carry out maintenance as prescribed.

 

f)

  unauthorised modifications or operations.

 g)

  the use of non-original replacement parts or not specific to the model.

 h)

  total or partial non-compliance with the instructions.

 

i)

  exceptional events (e.g. breakage due to natural catastrophe).

 

j)

  damage caused by power failures, voltage rushes, electromagnetic fields.

k) 

  the use of pellets with characteristics different from those recommended in this card.

Summary of Contents for UNIVERSAL JOLLY Maxi

























Reviews:

No comments