9
ENGLISH
all suitable safety devices to classify the electrical system as COMPLIANT with applicable safety standards. If this is not
the case, contact a Qualified Technician to adapt the system to required standards.
•
The power cord plug must be connected only AFTER the conclusion of the installation and assembly of the device, and
must remain accessible after installation if the device does not have a suitable and accessible double-pole switch.
•
Personnel assigned to handling the machines and equipment must always wear industrial gloves and boots.
•
The Maintenance Operator must recommend the Customer to sign an annual maintenance contract for the product, so
as to maintain the levels of safety and efficient performance of the product.
•
The Maintenance Operator must check the working hours of the product between one maintenance intervention and
another, to verify the actual work load of the stove. The actual hours of operation shall be reset at the end of the Technical
intervention and indicated on the Servicing Report.
02.4
EQUIPMENT FOR OPERATORS AND MAINTENANCE PERSONNEL
Every operator performing maintenance on the machine, must wear safety garments and personal protective equipment:
1 Protection headphones
2 Gloves hand protections
3 Respiratory mask
4 Face mask or goggles
5 Accident prevention boots
6 Overalls or smock
02.5
RESIDUAL RISKS
Though JOLLY MEC CAMINETTI S.p.A. does everything within its power to produce its systems with the greatest competence regarding
safety and consulting all the directives, laws, and regulations available, there are still, if minor, some residual risks during the phases of:
•
TRANSPORT AND INSTALLATION
• ELECTRICAL CONNECTIONS (Which must be done by a qualified electrician)
•
MAINTENANCE
Therefore, the technicians who perform these tasks must take these residual risks into account.
Removal or tampering with the protection and safety devices can be only be done voluntarily and may cause
serious injury to people.
Replace the safety signals when they become illegible or come off.
WARNING
Summary of Contents for AMBRIA2 10 kW
Page 18: ...18 06 4 DIMENSIONS All measurements are in mm C A B AMBRIA2 10 kW A 461 5 B 1073 C 487 8 ...
Page 37: ...37 ENGLISH NOTES ...
Page 38: ...38 NOTES ...
Page 39: ...39 ENGLISH NOTES ...
