Jolly Mec AMBRIA2 10 kW, Instructions For Installation, Use And Maintenance Manual

Page: 30 / 40

30
6.
Glass cleaning
Clean the glass daily with a damp sponge or paper hand towels
( Fig. 15-16 ). If the glass becomes dirty with black smoke, the
brazier is probably dirty or the combustion air must be increased.
Be careful not to use overly aggressive products to avoid ruining
the paint. Never spray detergents directly onto the parts to be
cleaned ( Fig. 17-18 ).
If the stove requires more frequent and deeper cleaning, check
the flue draught performance and the chimney cap. A windproof
chimney cap is strongly recommended.
Also clean the outside window where necessary (
Fig. 19).
7.
Cladding cleaning
For cleaning the cladding only use neutral water-based
detergents that must be used to wet a cloth and pass it on it
(
Fig. 20-21
). Never spray detergents directly on cladding parts
(
Fig. 22
).
Use of abrasive and/or corrosive chemical products can damage
the painted parts and are reason for invalidation of the warranty
on these parts.
The chromatic variations of the painted surfaces, especially
those in different materials and finishes and subject to different
temperatures, cannot be deemed reason for dispute as they
depend upon the natural characteristics of the materials and the
use of the product.
5. Pellet tank opening and cleaning
Apply light pressure to lift the pellet hopper cover, pulling
upwards, to release the magnet closure (
Fig. 13-14
).
Empty the pellet container every 500-1000 Kg of pellet burnt,
and check that no sawdust has accumulated on the bottom.
Clean the bottom of the container carefully.
After a long period of inactivity, empty the container and auger
completely.
Fig. 13 Fig. 14
Fig. 19
Fig. 16
Fig. 15
Fig. 17
Fig. 18
Fig. 22
Fig. 21
Fig. 20