manualshive.com logo in svg

Jolly Mec AMBRIA2 10 kW, Instructions For Installation, Use And Maintenance Manual

The Jolly Mec AMBRIA2 10 kW is a cutting-edge heating system that provides cozy warmth and comfort to your home. To ensure hassle-free installation, operation, and maintenance, we offer a comprehensive Instructions For Installation, Use And Maintenance Manual. Download this manual for free from our website and make the most out of your Jolly Mec AMBRIA2 10 kW.

Share
Download
background image

SM151 EN REV04 2022_03

3

ENGLISH

TABLE OF CONTENTS

 CHAP.01  PREMISES...................................................................................................................................4

 01.1 

WARNINGS .................................................................................................................................................. 4

 01.2 

SYMBOLOGY ............................................................................................................................................... 5

  01.3 

APPLIED STANDARDS ............................................................................................................................... 5

  01.4 

USE AND STORING OF THE INSTALLATION AND MAINTENANCE MANUAL ........................................ 6

  01.5 

MANUFACTURER LIABILITY AND WARRANTY CONDITIONS ................................................................ 6

 CHAP.02   ACCIDENT PREVENTION / SAFETY REGULATIONS ..............................................................7

  02.1  

GENERAL CONSIDERATIONS ................................................................................................................... 7

  02.2  

SAFETY REGULATIONS FOR ROUTINE MAINTENANCE AND USE ....................................................... 7

  02.3  

SAFETY REGULATIONS FOR EXTRAORDINARY MAINTENANCE AND INSTALLATION ...................... 8

  02.4  

EQUIPMENT FOR OPERATORS AND MAINTENANCE PERSONNEL ..................................................... 9

  02.5 

RESIDUAL RISKS ........................................................................................................................................ 9

 CHAP.03   HANDLING AND TRANSPORT ................................................................................................10

  03.1  

RECEIVING GOODS .................................................................................................................................. 10

  03.2  

LIFTING AND TRANSPORT ...................................................................................................................... 10

 CHAP.04   ECOLOGICAL REGULATIONS ................................................................................................11

  04.1 

DISPOSAL OF THE MACHINE .................................................................................................................. 11

 CHAP.05    DESCRIPTION..........................................................................................................................13

  05.1 

PRODUCT PRESENTATION ..................................................................................................................... 13

  05.2 

PRODUCT IDENTIFICATION .................................................................................................................... 14

 CHAP.06  TECHNICAL  DATA ...................................................................................................................15

 06.1 

HOMOLOGATION ...................................................................................................................................... 15

  06.2 

RECOMMENDED FUELS .......................................................................................................................... 16

 06.3 

COMPONENTS .......................................................................................................................................... 17

 06.4 

DIMENSIONS ............................................................................................................................................. 18

 CHAP.07  POSITIONING AND CONNECTIONS FOR THE INSTALLER .................................................19

  07.1 

SETTING UP OF EXTERNAL AIR INTAKES AND ELECTRIC CURRENT ............................................... 19

  07.2 

FLUE OR FUME EXHAUST SYSTEM ....................................................................................................... 20

  07.3 

INSTALLATION ROOM VENTILATION ..................................................................................................... 21

  07.4 

ASSEMBLY SEQUENCE ........................................................................................................................... 22

  07.5 

ELECTRICAL CONNECTIONS .................................................................................................................. 22

  07.6 

CONTROL UNIT ELECTRICAL WIRING DIAGRAM ................................................................................. 23

 CHAP.08  USE AND MAINTENANCE FOR THE USER ............................................................................24

  08.1 

APPLIANCE OPERATIONS ....................................................................................................................... 24

  08.2 

CONTROL UNIT ......................................................................................................................................... 24

  08.3 

APPLIANCE START AND USE .................................................................................................................. 25

  08.4 

SAFETY THERMOSTAT WITH MANUAL RESET ..................................................................................... 26

  08.5 

TIPS FOR THE USER ................................................................................................................................ 27

  08.6 

ORDINARY MAINTENANCE (by the costumer) ......................................................................................... 28

  08.7 

SCHEDULED PREVENTIVE MAINTENANCE (To be done by a specialised Technical Service Center) ..... 32

 CHAP.09  FAULT DIAGNOSIS AND TROUBLESHOOTING ....................................................................34

 09.1 

PROBLEMS ................................................................................................................................................ 34

 CHAP.10  ANNEXES ..................................................................................................................................35

  10.1 

COMMISSION REGULATION (EU) 2015/1185 ......................................................................................... 35

Summary of Contents for AMBRIA2 10 kW









































Reviews:

No comments

Related manuals for AMBRIA2 10 kW

Horus DOMUS Installation And Maintenance Manual preview
DOMUS
Brand: Horus Pages: 109
Pacific energy MIRAGE 30 SERIES A Installation And Operating Instructions Manual preview
MIRAGE 30 SERIES A
Brand: Pacific energy Pages: 36
LA NORDICA TermoRossella Plus DSA Instructions For Installation, Use And Maintenance Manual preview
TermoRossella Plus DSA
Brand: LA NORDICA Pages: 60
Kingsman FDV200 Installation Instructions Manual preview
FDV200
Brand: Kingsman Pages: 35
Napoleon Auburn NPS40 Installation And Operating Insctructions preview
Auburn NPS40
Brand: Napoleon Pages: 48
Heat Design SR4SE Installation And Operating Instructions Manual preview
SR4SE
Brand: Heat Design Pages: 16
Silvercrest SEK 2000 B2 Operation And Safety Instructions preview
SEK 2000 B2
Brand: Silvercrest Pages: 25
Silvercrest 365183 2101 Operation And Safety Instructions preview
365183 2101
Brand: Silvercrest Pages: 118
Harrie Leenders TRIAS Manual And Installation Instructions preview
TRIAS
Brand: Harrie Leenders Pages: 61
Woodstock Soapstone SURVIVAL HYBRID 212S Owner'S Manual preview
SURVIVAL HYBRID 212S
Brand: Woodstock Soapstone Pages: 7
Woodstock Soapstone 211 Navajo Hybrid Installation Manual preview
211 Navajo Hybrid
Brand: Woodstock Soapstone Pages: 12
WoodPro WS-TS-1500 Owner'S Manual preview
WS-TS-1500
Brand: WoodPro Pages: 36
deville C07753 Instruction Manual preview
C07753
Brand: deville Pages: 56
Style selections 3730318 Manual preview
3730318
Brand: Style selections Pages: 13
Harman Stove Company Conquest Installation & Operating Manual preview
Conquest
Brand: Harman Stove Company Pages: 38
Gasmate CS400 Quick Start Manual preview
CS400
Brand: Gasmate Pages: 2
Nordica FALO Instructions For Installation, Use And Maintenance Manual preview
FALO
Brand: Nordica Pages: 44
Kenyon Marine 500 Instructions And Parts List preview
500
Brand: Kenyon Marine Pages: 19

Brands by name

Popular brands

Load more brands